Transforms AC input current of up to 2000 Amps into an output current of 5A. General usage includes high-accuracy applications such as tenant submetering.

Transforms AC input current of up to 600 Amps into an output current of 80 mA. General usage includes recording, data logging, energy management, power monitoring and cost allocation.

Transforms AC input current of up to 1500 Amps into an output voltage of 0.333 volt. These transformers are particularly suitable when installed on wiring that is already in place, as it can easily snap around the existing conductor. Provides a self-locking mechanism and a 2.00 inch aperture.

Transforms AC input current of up to 1000 Amps into an output current of 5 Amps. These transformers are particularly suitable when installed on wiring that is already in place, as it can easily snap around the existing conductor.

Large aperture (bus-bar style) CTs measure high currents in multiple parallel conductors and bus bars. They are typically installed where the multiple conductors making up one phase connect together at the end of a bus-bar, or at the lugs of a breaker or disconnect.

Transforms AC input current of up to 600 Amps into an output voltage of 0.333 volt. These transformers are particularly suitable when installed on wiring that is already in place, as it can easily snap around the existing conductor. Provides a self-locking mechanism and a 1.25 inch aperture.

Converts the output from a single 5A output CT to an output current of up to 80mA. Used in high accuracy metering applications with Triacta PowerHawk and GATEWAY meters configured for 80mA CT.

Transforms AC input current of up to 2000 Amps into an output current of 5 Amps. These transformers are particularly suitable when installed on wiring that is already in place, as it can easily snap around the existing conductor.

Transforms AC input current of up to 3200 Amps into an output current of 5 Amps. These transformers are particularly suitable when installed on wiring that is already in place, as it can easily snap around the existing conductor.

Transforms AC input current of up to 800 Amps into an output current of 5A. General usage includes high- accuracy applications such as tenant submetering.

Transforms AC input current of up to 200 Amps into an output current of 5A. General usage includes high- accuracy applications such as tenant submetering.

Transforms AC input current of up to 2000 Amps into an output current of 5 Amps. These transformers are particularly suitable when installed on wiring that is already in place, as it can easily snap around the existing conductor.

Transforms AC input current of up to 400 Amps into an output current of 80 mA. General usage includes high-accuracy applications such as tenant submetering.

Flexible Rope CT current sensor measuring AC current up to 5,000 amps. It provides an output of 0.070 volts AC at 1000 amps through the primary when operating at 60Hz (at 50 Hz the output is 58.33 mV per 1000 A).

Transforms AC input current of up to 1200 Amps into an output current of 5 Amps. These transformers are particularly suitable when installed on wiring that is already in place, as it can easily snap around the existing conductor.

Transforms AC input current of up to 600 Amps into an output current of 5 Amps. These transformers are particularly suitable when installed on wiring that is already in place, as it can easily snap around the existing conductor.

Transforms AC input current of up to 200 Amps into an output current of 80 mA. General usage includes high-accuracy applications such as tenant submetering.

Transforms AC input current of up to 200 Amps into an output voltage of 0.333 volt. These transformers are particularly suitable when installed on wiring that is already in place, as it can easily snap around the existing conductor. Provides a self-locking mechanism and a 0.75 inch aperture.

Transforms AC input current of up to 1000 Amps into an output current of 5A. General usage includes high-accuracy applications such as tenant submetering.

Transforms AC input current of up to 2000 Amps into an output current of 5 Amps. These transformers are particularly suitable when installed on wiring that is already in place, as it can easily snap around the existing conductor.