Back to CT GuideNeed Help or a Quote ?

Flexible Rope CT current sensor measuring AC current up to 5,000 amps. It provides an output of 0.070 volts AC at 1000 amps through the primary when operating at 60Hz (at 50 Hz the output is 58.33 mV per 1000 A).

  • Used for energy management, equipment instrumentation, cost allocation
  • These CTs do not require an external integrator and are calibrated for use only with Triacta PowerHawk 4206 and 4224 (333mV) energy management meters (minimum F/W revision V1.53)
  • Input: Up to 5000 Amps
  • Frequency: 50 - 60Hz
  • Linearity Accuracy: ± 1%
  • Accuracy: 1% Accuracy from 20 to 5,000 Amps
  • Phase Angle: < 0.5 degrees
  • Operating Temperature: -15°C to +65°C
  • Maximum Voltage: 600 V (on bare conductor)
  • 4 ft Insulated leads Rated 600V, 24AWG
  • Insulation level: 600 Volt, 10 kV BIL full wave
  • UL Recognized E96927 to IEEE C57.13, CAN/CSA 60044-1
  • Meets UL STD 61010-1, CAN/CSA C22.2 No. 61010

Close Let's Get Started Form Icon

How can we Help?

Thank you! Your submission has been received. Someone will be in touch shortly.

Oops! Something went wrong while submitting the form. Please try again.

Close Let's Quote Form Icon

Get a Quote

Thank you! Your submission has been received. Someone will be in touch shortly.

Oops! Something went wrong while submitting the form. Please try again.